Prochem Ultrapac Renovate 5L
-heavy duty industrial cleaner to be used on floors, walls & carpets
-it contains an unique solvent-free formula that will penetrate dirt instant
-it requires a dilution of around 1 to 100 & for better results mix with hot water
– PH 10-12, one of the most cost effective product from the Prochem Range
-it will penetrate and lift carbon, soot, smoke, grease, rubber & other
The Prochem Ultrapac Renovate 5L comes with a unique solvent-free formulation that penetrates into the surfaces and fibres of the walls, carpets and upholstery, countertops and floors, getting to the soot and smoke particles that are embedded within and flushing them out. It uses neutralizing electrical charge to attract the soiling particles, literally yanking them out of the surface they’ve adhered to. Whether there is deeply ingrained soiling that has built up within the rugs at the entrance of your establishment, you want a prespray to loosen up the soiling on your carpet before you clean it, or there are grease stains on your kitchen floor, the Prochem Ultrapac Renovate 5L is up to the task. Even after fire incidents where there is soot that has got into the ceiling, plastics or cigarette smoke particles were absorbed by wood surfaces and have caused odours to develop, you will be able to reverse the damage and bring back the elegant look and feel to the interior space.
The Prochem Ultrapac Renovate 5L can be used on multiple areas, from polypropylene carpeting and porous surfaces, sealed wood and metals, all through to walls and floors that need thorough cleaning and restoration. The versatility allows you to have a unit product covering numerous sections of the residential or commercial establishment, delivering its powerful clean on every application. Note that you should always carry out a spot test on a hidden area before you proceed to use the Prochem Ultrapac Renovate 5L on the rest of the surface or material. In addition, it shouldn’t be used on unsealed wood, water sensitive fabrics, plus aluminium and delicate surfaces. The Prochem Ultrapac Renovate 5L can also be applied using different sets of equipment, from sprayers and sponges to floor machines- it all depends on the surface you’re working on.
After giving your surfaces and fabrics a thorough clean, the Prochem Ultrapac Renovate 5L leaves behind an invigorating floral scent. That way you get to enhance the ambience of your interior space- a welcome effect after having to deal with all the smoke and soot odours.
With the Prochem Ultrapac Renovate 5L, a little goes a long way. The highly concentrated industrial cleaner enables each purchase you make to cover multiple areas, which reduces your building’s cleaning and maintenance costs. In addition, it comes with a pocket-friendly price tag, further allowing you to make savings on each purchase. Restoring the carpeting, and other surfaces like walls and floors also enables you to avoid the hefty costs of making repairs and replacements, prolonging the life of your installations.
This is when you want to get rid of normal soiling. Dilute 10-20ml of the Ultrapac renovate with 1L of warm water. (A ratio between 1:100 and 1:50). Carry out the cleaning as usual.
Here, a higher dilution ratio of 1:20 is needed- like mixing 10ml of product with 200ml of warm water. Allow 2-5 minutes of dwell time, then scrub and rinse thoroughly with clean water.
For this, mix 5L of the Ultrapac Renovate with 50ml of Prochem Oxibrite. Apply with specialised spray equipment designed to be used on ceilings.
Prepare a solution of Prochem Ultrapac Renovate 5L with water. For every 10ml of product, mix it with 40ml of water. Set the washer’s application rate at your preferred level then carry on with the task.