Prochem Fibre & Fabric Rinse 5L
-professional acidic rinse agent for neutralising alkaline
-a great product for stabilising colour & preventing browning
-this product is woolsafe approved & it can be used on wool
-it requires dilution before use 1 to 50 up to 1 to 100, PH 4
-suitable for domestic and commercial cleaning projects
Prochem Fibre & Fabric Rinse Review
The Prochem Fibre & Fabric Rinse is designed to keep your carpet’s fibres strong and prevent colour bleeding, yellowing or browning. You carry out thorough cleaning, getting rid of the grime that has piled up over time and stains that have clung onto the material, and thereafter use the product to rinse and treat the carpet to offer it long lasting protection and care. A mildly acidic detergent, the Prochem Fibre & Fabric Rinse conditions and softens the fibres and fabrics, restoring the correct pH levels by neutralising the alkaline cleaners and any pre-spotters that had been applied. It stabilises the colour of the carpets and fabrics, and enhances their longevity.
The Prochem Fibre & Fabric Rinse is formulated to condition both natural and synthetic fibres. You can use it on your oriental rugs, all through to cotton and natural fibre upholstery fabrics. It’s also a WOOLSAFE approved product, and can thus be used on your wool carpeting and rugs without any risk. It’s always recommended that you carry out a pre-test on new material, be it carpets or fabrics, where you’re not sure about its compatibility with the product. In addition, don’t use it on water sensitive fabrics.
In the course of the cleaning, you also want to deal with the pungent smells that come from the decaying organic matter in the carpet. The Prochem Fibre & Fabric Rinse is up to the task. It neutralises the smell, all through to urine contamination, and leaves behind a fresh orange peel fragrance.
It comes concentrated, and needs to be diluted before use. If you’re using a portable extractor, use a 1:100 to 1:50 ratio (such as mixing 10-20 ml of product with 1L of warm water). If it’s for spray treatment, use a 1:50 to 1:20 ratio where 20-50 ml of Prochem Fibre & Fabric Rinse is used for every litre of water. With truck-mounted units, dilute 1L of product with 4L of water when making the metering concentrate.
Apply the solution for both cleaning and rinsing after the normal pre-spraying or cleaning procedure using an extraction machine. You can also use a pressure sprayer to apply the Prochem Fibre & Fabric Rinse solution onto the carpet. In case you’re using a truck-mounted unit, have the flow meter set at 2 gallons per hour. When it comes to upholstery fabric, rinse-extract or spray it with the diluted solution, then blot using a towel that’s clean white.