For a better experience please change your browser to CHROME, FIREFOX, OPERA or Internet Explorer.
Faber AlgaFloor

Faber AlgaFloor

Quality Cleaning With Faber AlgaFloor

Surface care is broad. Whether it’s with natural stone like marble and granite, or in the manmade installations, like ceramics, stoneware and agglomerates, they need proper care and treatment to keep them at their optimal. This ranges from using protective agents and stone sealants to ward off the effects of dirt, stains, and moisture, plus provide protection from the rising damp- which deliver their performance without negatively affective the beauty of breathability of the material being treated; stain removers to get rid of the grease, oil, coffee, rust, graffiti, ink and even pet urine stains; polishes and abrasive products that bring the shine to the surface and enhance its aesthetic appeal; waxes and finishes that enhance the natural beauty of the material; plus mastics and epoxy systems which come in when you want to make repairs as a result of cracks, chips and other sorts of damage that have affected your installation; plus cleaners that are used for daily care, extraordinary cases where you’re dealing with really stubborn dirt, and also worksite cleaning. Products like AlgaFloor from Faber come in to ensure that the surface remains clean and elegant.

With Faber, you can rest assured that you’re getting a quality product each time. Founded in Italy over 3 decades ago, the company has grown to serve markets in Europe, the Middle East and Asia. From England, Greece, Spain, and Poland, Saudi Arabia, the UAE and other Gulf nations, to Russia, Singapore, China, Thailand, the Philippines and Japan, the international reach is as a result of the superb performance of the products that are provided, plus the company’s adherence to professionalism, and delivering solutions addressing diverse consumer requirements. It maintains strict quality policy, geared to ensuring customer satisfaction, and wholesome development of the company staff. Loads of resources are pumped into the research and development division, to stay ahead of the pack and deliver solutions that cater to the ever-changing market needs. Products for professional use, targeting stone factories, installers, and cleaning companies, to those intended for DIY use, they are all included in the diverse range of solutions. With years of experience, a solid reputation and loyal customers across the continents, you can have the peace of mind that you’re getting a value return with your purchase.

Superior clean each time

The Faber AlgaFloor has been formulated for routine cleaning, allowing you to meet your day-to-day surface care needs. It gets rid of the grime that is building up on primarily the floor, but is also employed on worktops and walls, and can be used on natural stone or the man-made glazed and craquelé ceramics. What’s more, it achieves this without leaving a film of residue behind. This keeps the surfaces elegant for longer. The pleasant fragrance is a welcome bonus, and you get to see and smell the difference in the newly cleaned surfaces.

The pH Factor

Despite their elegance and durability, natural stone surfaces are sensitive to pH variations. This is witnessed with stains and the cleaning agents themselves. For instance, cranberry sauce, with a pH of 2, when it gets on calcite-based stone like limestone, travertine, marble, or onyx, will make that smooth surface to become rough- what is commonly referred to as etching. When it comes to the cleaning, using bleach-based products, and other acidic formulations that work wonders on dirt removal in other sections of the house, a similar result will occur. There are those that will outrightly corrode the finish and get through to the surface underneath, causing extensive damage. Vinegar, lemon juice, descalers, all-purpose cleaners- just because they work on other sections of the cleaning doesn’t make them automatically viable for the natural stone. On the other side of the divide are the alkaline agents like ammonia-based solutions. These tend to leave residue on the surface. You don’t want a film forming on your kitchen countertop after the water evaporates, which will just lead to more dirt sticking to the surface. Agitating the alkaline cleaner also abrades the sealer, and gradually the surface dulls over time. Then there are the abrasive cleaners like scouring powder, which can cause scratches on aluminium steel- so you can imagine the level of damage that they’ll cause to the natural stone surfaces.   

The neutral pH of Faber AlgaFloor means that is it’s suitable for a wide range of materials, where you can carry out the cleaning without worrying about the surface getting damaged. You can employ it for working on your marble, cement-marble agglomerate, marble-resin and quartz-resin agglomerates, clinker, porcelain stoneware, molten basalt, plus even limestone and travertine surfaces.

Easy on your pocket

It’s a budget friendly product too. After all, you want to meet your building’s surface care needs without punching a hole through your wallet. The affordable price of the formulation, plus its wide 900 – 1100 m2/L coverage, cuts down the costs you incur with your routine cleaning program. It also comes in different packaging, and you can opt for the 1L bottles, or larger 5L and 10L cans depending on the requirements of your particular situation.

How To Use The Faber AlgaFloor

The application is straightforward, and you don’t have to be professional to see it through. Follow these steps:

  1. Vacuum away the dust and coarse grit particles that are on the surface. Using the AlgaFloor to wash away these loose particles will just lead to resource wastage. You want it to focus on the gunk stuck on the surfaces.
  2. Prepare the Faber AlgaFloor Review solution that you will use. It comes concentrated, and needs to be diluted in clean water before proceeding to use. The ratio will depend on the type of surface in question. For ceramics, quartz agglomerates and porcelain stoneware, mix 10-20g of product in 5 litres of water. For the natural stone surfaces that have been polished, use 30-40g instead, for the same amount of water.
  3. Distribute the solution onto the surface in a fine layer, washing with your preferred method. Common application tools used are cloths, mops, hard floor cleaners and single disc machines. Some scrubbing action will be needed for those stubborn sections.
  4. Allow to dry.

Note that if you’ve used the recommended dilution ratios, then you won’t need to rinse the surface.


Faber AlgaFloor

leave your comment