For a better experience please change your browser to CHROME, FIREFOX, OPERA or Internet Explorer.
Faber 30 Review

Faber 30 Review

Faber 30 Review

Buy It Here

Are you faced with stubborn dirt? The kind that has been on the surfaces for so long that it has adhered strongly to the floors or worktops, forming tough bonds that defy conventional cleaners? Or perhaps it’s a case of rubber marks from tyres all over the car wash floors, or residue left behind by the forklifts hauling around packages like in a warehouse. These kinds of grime are troublesome to get rid of, and require tough-acting agents that will be able to chemically break them down. Not just any product makes the cut. You want to work with a formulation that has been developed to deal with such tough situations, from a brand you can trust. After all, you don’t want a case of the installations getting ruined. Making repairs on damaged floors or countertops can be an expensive endeavour. Turning to harsh cleaners, the likes of ammonia-based to acidic solutions that are pushed in DIY cleaning blogs can be risky especially if they are not compatible with the particular surface material in question. Faber, a world leader in surface care, has developed a wide range of formulations to tackle the diverse dirt and stain problems. These are highly specific in their applications, in order to deliver on their mandate while being safe for the surface being worked on. One of these is Faber 30, which has become a popular solution for handling those frustrating dirt problems. In this review, we will break down what this product offers, how it works, and how you can get the most out of it to continue protecting the surfaces in your home or commercial space. 

 

Benefits Of The Faber 30

  • Tackles stubborn dirt

From smudges on the countertops and floors that seem to have bonded with the surface, to grime trekked into the premises under people’s shoes which has accumulated over time – it all takes away the aesthetic appeal of the affected installation. It gets more frustrating when you keep throwing detergents at the problem, scrubbing for hours and the dirt doesn’t budge. In cases where you’re dealing with tough dirt on your installations, the alkaline-based Faber 30 comes in to deliver the desired chemical action to dissolve the contents on the surface for easier removal. 

There are also those marks left behind by rubber wheels of cleaning equipment, all through to the types of cars and forklifts in garages and manufacturing facilities respectively. These rubber marks are particularly frustrating to remove the more they build up. They are due to the phenomenon referred to as “plasticizer migration.”, where polymer compounds within the rubber wheel and tyres migrate onto the floor whenever the hot rubber is on it – like which occurs when driving around the forklift in the floor of the factory or when you’ve just come from a trip and parked your car in your garage. Car washes and parking lots are also affected by this. The plasticizers are needed by the rubber to improve the traction of the wheels, and the high-quality tyres have more of them. However, this doesn’t bode well for the affected floors, which usually end up being left in a messy condition. The Faber 30 delivers the cleaning power needed to remove these marks, restoring the beauty to your installation. 

The alkaline-based cleaner delivers on its mandate without affecting the appearance of the surface being worked on. This makes it suitable for working on polished installations, whether natural stone or ceramics, without worrying about the colouration or shine of the surface being watered down. The deep cleaning action of the Faber 30 also extends to synthetic floor coverings, ranging from PVCs to epoxy and polyurethane resins.

The Faber 30 has been formulated to be safe for different kinds of installations, whether indoors or outdoors. You can use it on natural stone structures like marble and limestone, their agglomerates like the marble-resin and marble-quartz agglomerate, all through to porcelain stoneware – including polished, natural, textured and lapped variations. The product is also safe for use on both craquelé ceramics and glazed ceramics, to the likes of quartzite, terracotta and travertine structures. The mechanical composition of this alkaline-based cleaner enables the Faber 30 to get rid of the dirt and grime without putting the surface being worked on at risk. Like any other surface care treatment, it is recommended that you first test out the product on an inconspicuous area before proceeding to use it on the rest of the surface – especially if it has not been expressly stated to be suitable for the particular material in question. 

The selection of active ingredients that are used in the Faber 30 formulation enables it to be ideal for deep cleaning synthetic floor coverings as well. These range from PVC structures all through to epoxy or polyurethane resins. This adds to the cost-effectiveness of the formulation, as you won’t need to stockpile dozens of different cleaners to handle the various areas in your establishment. As a welcome bonus, the amount of storage space needed for the cleaning supplies is drastically reduced. Moreover, by using the Faber 30 to deal with the stubborn grime that is riddling your surfaces, you get to protect the installation from premature wear and tear, thus avoiding costly repairs or replacements that would have been required later on. 

 

Working With The Faber 30

This is a concentrated product, and typically needs to be diluted before use. Use these dilution rates:

  • 10% dilution – Periodic cleaning in residential and commercial spaces, where you simply need the Faber 30 for its degreasing action. Mix 1 part of the product with 9 parts of water. 
  • 20 – 30% dilution – Removing large quantities of stubborn residue, where more powerful action is needed. 1 part of the cleaner is mixed with 2 to 4 parts of water. This also applies during worksite cleaning, when you’re working on acid-sensitive materials.
  • 50% dilution – Mix the cleaner with an equal amount of water when you’re using it for the final parts of the double wax stripping process, or when you’ve faced with very stubborn wax, resin, or polymer residues.
  • Undiluted – This applies when you’re dealing with very stubborn residue, and a simultaneously highly absorbent material – like getting rid of tough residue on cotto or concrete surfaces. 

After preparing the Faber 30 solution, proceed to treat the surface with these steps:

  1. Spread the product onto the target area. Ensure you achieve a uniform coverage over the target surface. 
  • Different tools can be used for the application. e.g., you can work with a large brush or single disc machine to distribute the product over the area especially if you’re working on an expansive surface. Cloths and mops can also be used for the smaller spaces. 
  1. Give the product 10 to 15 minutes to chemically act on the dirt and residue. It will dissolve the contents, for them to be easily removed. You can further enhance the effectiveness of this process by adding some mechanical scrubbing action, either it is with the brush or a single disc machine. Make passes over the surface at regular intervals depending on how stubborn the residue is.
  2. Clear the residue from the surface. Do this by pouring more water onto the surface, forming an emulsion with the contents that are there, then using the brush or single disc machine to distribute it. Proceed to remove the contents with a liquid vacuum cleaner, or work with absorbent cloths or paper towels to soak up the excess material.
  3. Give the surface a thorough rinse. 

If there is residue that remains after the process, you can repeat the task following these steps. Once the surface dries, normal traffic can be permitted back onto it. The drying time will depend on the prevailing temperature and humidity conditions, as well as the absorption levels of the material being worked on. 

 

Guide To Selecting Surface Care Detergents

Is the Faber 30 suitable for the particular kind of surface you want to work on? Different factors come into focus when choosing the right cleaning agent to use. These include:

Cleaning situations vary. First is the type of dirt involved. You can be dealing with greasy deposits, rubber tire marks, or even soiling that gradually got embedded into the surfaces being worked on. The more stubborn the dirt, the stronger the efficacy of the cleaning agent that is required – but that’s just one aspect of the surface care process.

Next is the type of material being worked on. From natural stone surfaces, ceramics, to structures like agglomerates, the kind of surface will definitely impact the choice of cleaning agent. However, given that it’s likely there are already different surfaces in the establishment, does this mean that you will be forced to get a unique cleaning agent for each one of them? This would quickly cause the cleaning costs in the premises to spiral out of control, and also force you to keep looking for storage space for the cleaning supplies, and even need to expand your waste handling facilities to accommodate all that packaging that will need to be disposed of. 

What about the compatibility of the cleaning product with the equipment that you have in your facility? from clothes, scrubbing brushes, to larger mechanical gear such as single disc machines, you want to work with a formulation that will be suitable for use with the particular method you have in place in your premises. 

The versatility that you get with products like the Faber 30 is key in reducing the costs that go into the building care and maintenance process. This ranges from the effectiveness of the product against different types of stubborn dirt, the safety of the formulation on both indoor and outdoor surfaces of different materials, all through to the applicability of the product with traditional cleaning methods where you’re working on surfaces with a cloth, to the modern gear including the high capacity single-disc cleaning machines that are used when working on expansive areas. 

The pH of the cleaning agent will impact the surface you’re working on. Here you get to go with a product that will get the cleaning task done, without putting the structural integrity of the area being cleaned at risk. After all, you simply want to get rid of the dirt and grime, not watch the surface get corroded by harsh chemicals. 

The type of formulation also dictates the kind of cleaning that will be done. If you can recall from Chemistry class, the pH looks at the hydrogen ion concentration in a solution, and the scale spans from 1—14, with a pH of 7 being neutral. Generally speaking, acidic-based cleaners are used when brightening metal surfaces, or getting rid of mineral deposits or oxidation residue. That’s why you find acidic cleaners like vinegar (diluted solution of acetic acid) and lemon juice (contains citric acid) being fronted as popular solutions or dealing with limescale or rust stains that are on glassware and sinks. Stronger acids like sodium bisulphate, hydrochloric acid or sulphuric acid find applications in toilet cleaners. 

On the other hand, alkane-based cleaners tackle oils, fatty residue, grease and proteins. This gives alkaline cleaners more common applications. There are weak versions like baking soda, which are used in DIY applications of cleaning glass and sometimes wall tiles. The stronger ammonia solution is also used for cleaning surfaces, with the extra benefit of not leaving behind residue on the area being worked on. Chlorine bleach that is also used as a disinfectant, sodium carbonate (washing soda), as well as Trisodium phosphate (TSP) that is commonly used to clean walls when preparing them for painting, as well as cleaning mildew from surfaces – these are all alkaline cleaners. Sodium hydroxide in particular is very strong, and you will find it being a component in oven and drain cleaners. 

The power of the cleaning agent needs to be considered in tandem with its effect on the particular surface being worked on. Take natural stone surfaces for instance. The vinegar or lemon juice solutions that are typically effective all-natural cleaning agents, will harm the natural stone. The acid reacts with the compounds of the natural stone, like the calcium carbonate that marble tiles are composed of. They eat away at the surface – the etching that causes dull spots to form, which ruins the aesthetic appeal of the installation, as well as putting its structural integrity at risk. However, this does not mean that alkaline agents are automatically suitable either. It all depends on the kinds of material being worked on. For instance, when strong alkalis like ammonia or hydrogen peroxide are used on dark marble surfaces, they end up discolouring them. Even bleach that is to be used on limestone tiles needs to be carefully diluted to prevent from damaging the stone. 

As such, it’s vital that you stick with formulations that have been developed particularly for dealing with that kind of installation. When going through the product label of the surface cleaning agent that you intend to use, look into the kinds of material that just can be safely used on, as is with the case of the Faber 30 under review. If you’re uncertain of the suitability of the product for the particular installation, carry out a spot test on a hidden section to see the effects that the products will have. 

  • Cost factor 

Definitely, you don’t want to break the bank in the process of cleaning your surfaces. The formulation used needs to be within your budgetary constraints, whether it’s for surface care at home, or cleaning in commercial spaces. Here, one of the issues to look into is the price at which the product retails at. Established brands, where the company has invested heavily in industrial production processes, enable you to benefit from the economies of scale, where the company is able to manufacture a wide range of solutions in massive quantities in its production lines. This cuts down the cost of the individual products hitting the shelves, giving the buyer a more affordable purchase price per unit. For instance, the wide market reach of Faber, coupled with its heavy investment into its R&D labs and production facilities, enables it to set up efficient systems to deliver its 250+ products in sufficient quantities to reach its consumers. Massive production lines end up reducing the final cost of individual products like the Faber 30, meaning that you get to benefit from a budget-friendly price tag. 

 

The kind of packaging available also matters, since you want to have adequate supply to meet your surface care needs without straining your budget. For instance, with the Faber 30, you have different options to pick from, be it the 1L bottles that come 12 bottles in a box, the larger 5L cans which are packaged as 4 cans in a box, as well as the 10L cans, purchased individually. That way you can go with packaging that meets your establishment’s cleaning needs. 

 

Giving your Surfaces Extra Care

In addition to routine cleaning with formulations like the Faber 30, there are additional measures that you can put in place to prolong the life of the different installations in your home or commercial space. 

  • Using a doormat

It’s a simple accessory, yet so pivotal in preventing dirt from crossing your threshold and keeping your indoor space clean. After all, most of the dirt that winds up in the indoor space has been tracked in from the outdoors, from dust to mud and snow. With an entrance mat in place, the dirt that is at the bottom of people’s shoes can be removed before it gets transferred onto the open floor. There’s also the welcome benefit of sprucing up the décor with a stylish mat that brings out your personality. This mat should be long enough for both feet to step onto it when an average-sized adult is making a stride. When choosing the mat that you will use for your space premise, be keen on the material. Indoor mats preferably should have a vinyl or rubber backing, which keeps the mat in place, and makes it easy to vacuum up the dirt that has been absorbed in the mat without it keeping on shifting around. Outdoor mats on the other hand are ideally made of rubber materials, giving those accessing the premises a place to scrape off the dirt that is on their shoes. By keeping the dirt that eventually gets to the floor in low levels, you also minimise the amount of cleaning resources that will be required, resulting in more savings on your building’s cleaning and maintenance budget. 

When removing the dirt that has been trapped in the mat, this can be vacuumed off or you can shake the mat outside. It can be washed using liquid soap and some water, after which it is rinsed and allowed to dry. It’s imperative that the mat dries before being put back in place, to avoid a case of moisture getting trapped underneath and putting the floor at risk of water damage.

Should the mat get wet while still in position, causing muddy residue to be transferred to the floor, or grime begins building up on the surface, then this is a sign that the area underneath also needs to be thoroughly cleaned – and products like the Faber 30 are up to the task.

  • Discourage shows from being worn in the house

One way to keep yourself from worrying about how much dirt and mud are being tracked into your home by shoes is by banning wearing them in the house. Having a shoe rack at the entrance, or a decorative basket where people can place their shoes, will drastically minimise how much grime winds up in the indoor space. 

  • Dealing with pets

These furry members of the family are notorious for the damage they met out on floors. Each one of them has its required measure to counteract it. For instance, for the pets that frequent paddles when playing, or those coming in covered in snow, they could use a thorough drying before getting through the front door – which is why it will be important to have a towel specifically for drying their paws and coats. Regular grooming is also needed to prevent all that dander from being strewn all over the indoor space, and to keep their claws short before they scratch up the entire floor.

  • Set up a custom mudroom

Kids trekking in a bunch of dirt or mud whenever they walk into the house, guests and family members coming in with wet boots, coats and outdoor gear – wouldn’t it be nice if you had a “boundary” separating the outdoor world and the inside of your house? That’s what a mudroom is for, if you have the space for it. Usually, it is located at the entryway into the house, or close to the garage, depending on the entrance that people frequently use when coming into the house. Even if your home doesn’t have one in its original design, you can have a custom one with measures like converting the porch or repurposing some space in the garage. Of course, this means that the mudroom will get very dirty since it will be handling all the load from the outdoors – but that’s why you have formulations like the Faber 30 in your cleaning arsenal to deal with those large build-ups of dirt. 

Establishing a mudroom for your home will enable you to contain the bulk of the dirt to one area, which can then be worked on more efficiently. You also get to add extra storage space if you use it as the designated spot for holding your outwear, bags and mail. It’s also a handy spot for placing your pets’ items, from the dog’s feeding bowl to the cat’s litter box. It also acts as a ‘launch pad’ to the outside world. Whenever people in the house want to leave, it will be much easier when their items are not tossed around the house, but rather kept in an organised mudroom. That way, as you head out of the house you have one spot that holds your bags, coats and shoes.

  • Warding off damage from furniture

Those elegant sets of furniture can be a threat to your floor if mishandled. For starters, dragging any kind of furniture, whether it is a chair, the cabinet, or the sofa, creates friction and can scratch the floor surface. Whenever you want to move the furniture, you should lift and carry it, instead of dragging it across the floor. Furniture pads go a long way in protecting the floor, providing soft padding under each leg. For furniture that has wheels – like the office chair, it is recommended that you use protective mats under it. 

  • Stick to the recommended cleaning agents

The various kinds of surfaces have their cleaning requirements. These variations are based on aspects such as the kind of material involved – whether it is natural stone, cotto, ceramics or agglomerates, all through to aspects such as whether or not the surface has been sealed or polished. You don’t want a case where the cleaning agent selected breaks down the protective finishes that have been applied, as this will expose the floor to risks of damage. The kind of dirt and grime also weighs in, due to the required chemical reactions needed to remove them from the surface. e.g., dealing with greasy residue on countertops is different from dealing with beverage stains like coffee and tea. On the other hand, issues like urine stains call for enzyme-based cleaners. In such cases, it’s a balancing act, to get cleaner that is powerful enough to deal with the particular issue, while at the same time being gentle on the surface being worked on. Even while using the correct product, you will need to follow the instructions that come with it, such as the different dilution ratios of the Faber 30 depending on the levels of absorbency of the installation being worked on. 

 

Get More Out Of The Faber 30 With These Extra Tips

  • Before you start the application, it is recommended that you first sweep or vacuum the target surface. The dirt and loose debris that is on the area being worked on would simply become muddy when wet, which would add to the amount of work involved. This is while they can easily be swept or vacuumed off the surface. 
  • It’s advisable to treat small sections of the surface at a time. Divide the area depending on how absorbent the material being worked on is i.e., for the highly absorbent surfaces, working on smaller sections like 4-5m² at a time – these are for the likes of cotto or terracotta installations. For surfaces with low absorption rates, like polished marble or limestone floors, as well as ceramic tile surfaces, then the sections can be larger.
  • It’s important for the surface to remain covered with the solution during this process. When you’re dealing with highly absorbent materials, feel free to add more solution to the area, compensating for the amount that has been absorbed into the material. 
  • When selecting the type of abrasive disc to use for the cleaning process, this will vary depending on the kind of dirt involved, as well as the surface being cleaned. White pads are ideal for the polished and delicate surfaces, including natural stone materials like marble and limestone, plus glazed tiles. On the other hand, the green or light blue pads are better suited for cleaning rough and unpolished surfaces like terracotta and cotto installations.
  • If you’re applying the Faber 30 on new installations, like tiles that have recently been laid, or the grout has just been applied, first allow the treatments used to fully cure before washing the area with the product.

Faber 30 Review

 

Top