Blog Details

Cleanfast Graffiti Remover Data Sheet MSDS

GRAFFITI REMOVER
PRODUCT INFORMATION:
Solvent used for the removal of Graffiti from most surfaces. Will effectively remove most spray paints,
correction fluids, crayon & permanent markers from most surfaces & substrates such as natural stone,
masonry surfaces, ceramic & porcelain tiles etc. Not to be used on solvent sensitive surfaces.
_________________________________________________________
ADVANTAGES:
RAPID TENSION REMOVAL: Contains solvents designed to overcome surface tension to
remove spray paint, crayon marks & permanent markers from
most substrates such as natural stone, masonry surfaces,
ceramic & porcelain tiles etc.
NON-CORROSIVE: Unlike many solvent cleaners it has very low corrosion
towards common metal and can be used without any problems.
WATER RINSABLE: Even though Graffiti Remover is solvent based, it is water
miscible and can be rinsed off easily with water.
EASY TO USE: Can be applied by brush, spray or dip tank.
___________________________________________________________
DIRECTIONS FOR USE:
Ensure area to be treated is wet. Apply liberally onto surface by using a scour pad or brush. Allow at
least 10 minutes contact time to allow product to penetrate. Agitate aggressively on markings for
removal & scrub thoroughly away using lots of clean water. Allow to dry & repeat process if necessary.
____________________________________________________________
HEALTH AND SAFETY: See Safety Data Sheet.
____________________________________________________________
PACKAGING:
All our plastic drums are high molecular weight; high-density polyethylene designed to bring the
product to the customer in perfect conditions.
Size: 5Lt Fluorinated Drum.
___________________________________________________________
QUALITY ASSURANCE:
This product is manufactured in Ireland to ISO 9002 quality standards & conforms to R.E.A.C.H & CLP
regulations. Shelf life: Not less than 3 years
Safety Data Sheet
Corresponding to Regulation (EC) No 1272/2008 (CLP) Page 1 of 8
Date of issue: 01.01.17 Replaces version of: 01.01.14
PRODUCT NAME: GRAFFITI REMOVER
SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE
COMPANY/UNDERTAKING
1.1. Product identifier
Product Name GRAFFITI REMOVER
Product No. OIR 619
1.2. Relevant identified uses of the substance or mixture and uses advised against
Identified uses: Industrial Solvent
1.3. Details of the supplier of the safety data sheet
Supplier Cleanfast.ie
Ashleigh House, JFK Road, Dublin 12
Tel: 1800 848700 (free) Email:info@fastdeal.ie
1.4. Emergency Contact: National Poisons Information Centre, Beaumont Hospital,
Beaumont Road, Dublin 9. Tel: +353(01)8092566
SECTION 2: HAZARDS IDENTIFICATION
2.1. Classification of the substance or mixture
Classification: Regulation (EC) No 1272/2008: H302, H312, H332, H315, H319
Human health: Harmful if swallowed, in contact with skin or if inhaled. Causes Skin Irritation.
Causes Serious Eye Irritation
Environment: This product is not expected to be hazardous to the environment.
2.2. Label elements
Detergent Labelling: Contains: 2-BUTOXYETHANOL
Labelling
WARNING
Hazard H302 Harmful if swallowed
Phrases H312 Harmful if in contact with skin
H315 Causes Skin Irritation
H319 Causes serious eye irritation
H332 Harmful if inhaled
Safety Data Sheet
Corresponding to Regulation (EC) No 1272/2008 (CLP) Page 2 of 8
Date of issue: 01.01.17 Replaces version of: 01.01.14
Precautionary P405 & 102 Store locked up. Keep out of the reach of children
Statements P233 Keep container tightly closed
P260 Do not breathe fume/vapours/spray
P262 Do not get in eyes, on skin or on clothing
P264 Wash hands thoroughly after handling
P270 Do not eat, drink or smoke when using this product
P271 Use only outdoors or in a well-ventilated area
P280 Wear protective gloves/clothing/eye/face protection
P301, 310 IF SWALLOWED: Rinse out mouth immediately with water.
&331 Immediately call a poison centre or doctor/physician. Do not
induce vomiting
P302, 352 IF ON SKIN: Remove contaminated clothing & rinse skin
332 & 313 thoroughly with soap & water. Obtain medical attention if
irritation persists
P362 Take off contaminated clothing and wash it before reuse
P304 & 340 IF INHALED: Remove person to fresh air &keep at rest in a
position comfortable for breathing. Immediately call a poison
centre or doctor/physician if you feel unwell.
P305, 351 IF IN EYES: Flush eyes with water, remove contact lenses if
310, 337 present & continue rinsing. If irritation persists get medical
& 313 advice/ attention
P501 Dispose of contents/container to in accordance with local
regulations. Recover, reclaim or recycle, where possible.
2.3. Other hazards N/A
SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS
3.2. Mixtures
2-BUTOXYETHANOL 10-30%
CAS-No.: 111-76-2 EC No.: 203-905-0
Classification (EC 1272/2008)
Acute Tox. 4 – H302
Acute Tox. 4 – H312
Acute Tox. 4 – H332
Skin Irrit. 2 – H315
Eye Irrit. 2 – H319
A Full Text for all Hazard Statements are Displayed in Section 16
Safety Data Sheet
Corresponding to Regulation (EC) No 1272/2008 (CLP) Page 3 of 8
Date of issue: 01.01.17 Replaces version of: 01.01.14
SECTION 4: FIRST AID MEASURES
4.1. Description of first aid measures
Inhalation: Remove immediately from source to fresh air. Obtain medical attention if any
discomfort continues. Provide rest, warmth & fresh air. When breathing is
difficult, properly trained personnel may assist affected person by administering
oxygen.
Skin Contact: Remove contaminated clothing & wash skin with soap & water. Obtain medical
attention if irritation persists.
Eye Contact: Remove any contact lenses before rinsing. Promptly wash eyes with plenty of
water while lifting the eye lids. Continue to rinse for at least 15 minutes. Obtain
medical attention if irritation persists.
Ingestion: DO NOT INDUCE VOMITING! NEVER MAKE AN UNCONSCIOUS PERSON
VOMIT OR DRINK FLUIDS! If vomiting occurs, keep head low so that stomach
content doesn’t get into the lungs. Drink plenty of water. Get medical attention
immediately. Provide rest, warmth & fresh air.
Protection of
first aider: Avoid ingestion, inhalation, contact with skin and eyes (see Section 8.)
4.2. Most important symptoms and effects, both acute and delayed
Inhalation: Irritation of nose, throat & airway. In case of overexposure, organic solvents may
depress the central nervous system causing headaches, fatigue, dizziness,
nausea, & intoxication & at very high concentrations unconsciousness & death.
Ingestion: May cause stomach pain or vomiting. Entry into the lungs following ingestion or
vomiting may cause chemical pneumonitis & may be fatal if enters airways
Skin contact: Harmful in contact with skin. Contact may cause redness, irritation & dry skin.
Eye contact: Causes serious irritation to eyes & mucous membranes
4.3. Indication of any immediate medical attention and special treatment needed
The severity of the symptoms described will vary dependant of the concentration & the length
of exposure.
SECTION 5: FIRE FIGHTING MEASURES
5.1 Suitable Extinguishing Media: Foam. Dry chemicals, sand, dolomite etc.
5.2 Unsuitable: N/A
5.3 Specific Hazards: Vapours are heavier than air & may spread near ground
to sources of ignition. Avoid breathing fire vapours. Cool
containers exposed to flames with water until well after
the fire is out. Keep run-off water out of sewers and water
sources.
5.4 Special Equipment for the
protection of Fire Fighters: Wear full protective clothing & breathing apparatus.
Safety Data Sheet
Corresponding to Regulation (EC) No 1272/2008 (CLP) Page 4 of 8
Date of issue: 01.01.17 Replaces version of: 01.01.14
SECTION 6: ACCIDENTAL RELEASE MEASURES
6.1 Personal Precautions: Wear protective clothing (see Section 8).
6.2 Environmental Precautions: Do not discharge into drains, water courses or onto the
ground. Spillages or uncontrolled discharges into
watercourses must be immediately alerted to the
Environmental Agency or other appropriate regulatory body
6.3 Methods for Cleaning up: Absorb in vermiculite, dry sand or earth and place into
containers. Do not contaminate water sources or sewer.
Disposal should be carried out in accordance with the
Hazardous Waste Regulations. If any liquid enters the
drainage system or watercourses inform the local
authorities, Fire Brigade and Environment Agency.
SECTION 7: HANDLING AND STORAGE
7.1 Handling
Technical Measures: No special measures required.
Safe Handling Advice: Avoid spilling, skin and eye contact. Ventilate well, avoid
breathing vapours. Use approved respirator if air
contamination is above accepted level.
7.2 Storage
Technical Measures: Keep container closed.
Storage Conditions: Store in tightly closed original container in a dry, cool and
well-ventilated place. Keep in original container.
Incompatible Products: Plastic Drums.
Packaging: Fluorinated Plastic or Steel Drums.
Packaging Materials: Use original container.
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
8.1 Engineering Measures: No special measures required.
8.2 Personal Protection Equipment:
Respiratory Protection: Provide adequate ventilation in areas of confined space. If
engineering controls do not maintain airborne concentrations
below recommended exposure limits, where applicable an airpurifying
respirator type ABEK (EN 14387) respirator cartridges
must be worn
Hand Protection: Use Chemical Resistant Gloves to EN Standard 374 Level 1,
Letter Code K
Eye Protection: Use Chemical Goggles or Face Shield to EN Standard 166
Level 3 or higher
Skin Protection: Wear Plastic Apron EN Standard 13034 Type PB[6] & Face
Shield EN Standard 166 Level 3 or higher
Safety Data Sheet
Corresponding to Regulation (EC) No 1272/2008 (CLP) Page 5 of 8
Date of issue: 01.01.17 Replaces version of: 01.01.14
8.3 Hygiene Measures: Handle in accordance with good industrial hygiene & safety
practices. Wash at the end of each work shift and before eating,
smoking & using the toilet. Promptly remove any clothing that
becomes contaminated. Wash promptly with soap & water if
skin becomes contaminated. Use appropriate skin cream to
prevent drying of skin. When using, do not eat, drink or smoke.
8.4 Occupational Exposure Limits:
OELV = Occupational Exposure Limit Value.
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
a) Appearance: Clear Liquid
b) Odour: Mild sweet, ester
c) Odour threshold: N/A
d) pH: 7+/-0.5
e) Melting point / freezing point: -70 – -75°C
f) Initial boiling point & boiling range: No data available
g) Flash point: 67 °C (Closed Cup)
h) Evaporation rate: No data available
i) Flammability solid, gas: No data available
j) Upper/lower flammability or explosive limits: Lower flammable/explosive limit:
1.1 – 1.3
Upper flammable/explosive limit:
10.6
k) Vapour pressure: 0.117 kPa @ °C
l) Vapour density: No data available
m) Relative density: 0.90kg/dm3
n) Solubility(ies): Miscible in Water.
Soluble in Methanol
o) Partition coefficient: n-octanol/water: -0.8
p) Auto-ignition temperature: 224 – 232°C
q) Decomposition temperature: No data available
r) Viscosity: 3.2 – 3.3 mPa s @ 20°C
s) Explosive properties: No data available
t) Oxidising properties: No data available
SECTION 10: STABILITY AND REACTIVITY
10.1. Reactivity: None known
10.2. Chemical stability: Stable under normal temperature conditions
and recommended use.
10.3. Possibility of hazardous reactions: Forms peroxides of unknown stability.
10.4. Conditions to avoid: Avoid heat, flames and other sources of
ignition.
10.5. Incompatible materials: Strong oxidising substances.
10.6. Hazardous decomposition products: Fire creates: Toxic gases/vapours/fumes of:
Carbon monoxide (CO). Carbon dioxide
(CO2).
Safety Data Sheet
Corresponding to Regulation (EC) No 1272/2008 (CLP) Page 6 of 8
Name STD OELV (8-hour reference
period)
ppm mg/m3
OELV (15 minute
reference period)
ppm mg/m3
Notes
2-BUTOXYETHANOL OELV 20 98 50 246 Sk,
IOELV
Date of issue: 01.01.17 Replaces version of: 01.01.14
SECTION 11: TOXICOLOGICAL INFORMATION
11.1. Information on toxicological effects:
Inhalation: Harmful by inhalation.
Ingestion: Harmful if swallowed.
Skin contact: Harmful in contact with skin. Irritating to skin
Eye contact: Irritating to eyes.
:
Acute and chronic health hazards: A single exposure may cause the following adverse
effects: Central nervous system depression.
Target organs: Skin Eyes Respiratory system, lungs
11.2.Toxicological information on ingredients:
2-BUTOXYETHANOL CAS-No.: 111-76-2
Acute toxicity:
Acute Toxicity (Oral LD50)
1746 mg/kg Rat
Acute Toxicity (Dermal LD50)
0.63 mL/kg Rabbit
Acute Toxicity (Inhalation LC50)
450 ppm (vapours) Rat 4 hours
REACH dossier information
SECTION 12: ECOLOGICAL INFORMATION
Eco-toxicity
Dangerous for the environment if discharged into watercourses. The product is easily
biodegradable.
12.1. Toxicity
Ecological information on ingredients:
2-BUTOXYETHANOL CAS-No.: 111-76-2
Acute Toxicity – Fish
LC50 96 hours 1474 mg/l Onchorhynchus mykiss (Rainbow trout)
Acute Toxicity – Aquatic Invertebrates
EC50 48 hours 1550 mg/l Daphnia magna
Acute Toxicity – Aquatic Plants
EC50 72 hours 911 mg/l Pseudokirchnerella subcapitata
NOEC 72 hours 88 mg/l Pseudokirchnerella subcapitata
REACH dossier information
12.2. Persistence and degradability
Degradability: The surfactant(s) contained in this preparation comply with the
biodegradability criteria as laid down in Regulation (EC) No.648/2004 on
detergents. Data to support this assertion are held at the disposal of the
competent authorities of the Member States and will be made available to
them, at their direct request or at the request of a detergent manufacturer.
12.3. Bioaccumulative potential
No data available on bioaccumulation.
12.5. Results of PBT and vPvB assessment
Not determined.
12.6. Other adverse effects
Not determined.
Safety Data Sheet
Corresponding to Regulation (EC) No 1272/2008 (CLP) Page 7 of 8
Date of issue: 01.01.17 Replaces version of: 01.01.14
SECTION 13: DISPOSAL CONSIDERATIONS
General information: Waste to be treated as controlled waste. Disposal to licensed
waste disposal site in accordance with local Waste Disposal
Authority
13.1. Waste treatment methods
Dispose of waste in accordance with local regulations. Recover, reclaim or recycle, where
possible.
SECTION 14: TRANSPORT INFORMATION
The product is not covered by international regulation on the transport of dangerous goods:
REGULATIONS CLASS
RID/ADR: Not Classified
ICAO/IATA-DGR: Not Classified
GGVSee/IMDG-Code: Not Classified
14.1. UN number
N/A
14.2. UN proper shipping name
N/A
14.3. Transport hazard class(es)
N/A.
14.4. Packing Group
N/A
14.5. Environmental Hazards
Environmentally Hazardous Substance/Marine Pollutant: N/A
SECTION 15: REGULATORY INFORMATION
15.1. Safety, health and environmental regulations/legislation specific for the substance or
mixture
Statutory Instruments
Corresponding to Preparations Regulations S.I. No. 62 of 2004
Approved Code Of Practice
Classification and Labelling of Substances and Preparations Dangerous for Supply.
Guidance Notes
Workplace Exposure Limits EH40.
EU Legislation
Regulation (EC) No 1272/2008 of the European Parliament and of the Council of 16
December 2008 on classification, labelling and packaging of substances an

d mixtures,
amending and repealing Directives 67/548/EEC and 1999/45/EC, and amending Regulation
(EC) No 1907/2006 with amendments.
15.2. Chemical Safety Assessment
No chemical safety assessment has been carried out.
Safety Data Sheet
Corresponding to Regulation (EC) No 1272/2008 (CLP) Page 8 of 8
Date of issue: 01.01.17 Replaces version of: 01.01.14
SECTION 16: OTHER INFORMATION
Revision Comments
Re-issued according to Regulation (EU) No 453/2010.
Revision Date: 01.01.17
Revision No: 4
Replaces version of: 01.01.14
Hazard Statements In Full
H302 Harmful if swallowed
H312 Harmful in contact with skin
H315 Causes skin irritation
H319 Causes serious eye irritation.
H332 Harmful if inhaled
.__________________________________________________________________________
The information contained herein is based on the present state of our knowledge and is
intended to describe our products from the point of view of safety requirements. It should
therefore not be construed as guaranteeing specific properties.

Cleanfast Graffiti Remover Data Sheet MSDS