Chimiver Lios Talita Plus
Chimiver Lios Talita Plus | Oiled Floor Refresher
Restore and refresh all your oiled floors & oiled surfaces with our new refresher
It contains a blend of organic oil and is compatible with all waxed and oiled floors
It can be applied with a cloth, a brush, a flat mop or a floor buffer for larger floors
To be applied in 1 coat system to a clean, dry and oiled wood surface or floors
The product is available in a cool natural finish and also in an elegant white wash
1 L of Chimiver Lios Talita Plus | Oiled Floor Refresher will cover 30-50 sq m
It can be used for repairing dull patches, high traffic areas & for sealing wood
The estimated drying period is around 2 hours but it can vary from job to job
Highly recommended for heavy duty professional use and also DIY use
The product penetrates the wood in full and it does not create an artificial coat
Chimiver Lios Talita Plus | Oiled Floor Refresher | Why Use It
An oiled floor can stay nice and clean for many years or it can be watermarked and damaged within a few months. The difference is made by the regular maintenance. All floor oils and hardwax oils contain a blend of natural oils that are likely to evaporate due to a number of factors. A quick refreshing with the new Chimiver Lios Talita Plus | Oiled Floor Refresher and the floor will look like new again. The process of refreshing the oiled floor or furniture is pretty easy and it does not require the use of professional equipment or tools.
Chimiver Lios Talita Plus | Oiled Floor Refresher | Where To Use
Any type of wood surface that was sealed with floor oil or hardwax oil will require regular refreshing. The floor oil has to be topped up and the floor | surface protection has to be reinstated. The new Chimiver Lios Talita Plus | Oiled Floor Refresher is a professional oiled floor refresher that is compatible with all types of oiled floors, oiled furniture, oiled doors, oiled frames, oiled worktops, etc. The product penetrates the surface in full and it dries in a matter of minutes. The clear option should be used to refresh all natural looking oiled surfaces while the white option should be used to refresh all white or white wash finishes. Suitable for indoor use only.
Chimiver Lios Talita Plus | Oiled Floor Refresher | How To Use It
Ensure that the surface is dry and clean. Do not apply to surfaces that were not oiled. Only apply a tiny amount of the product at once and rub it into the wood surface until the wood absorbs most of it. Any excess should be removed and then move along. The essential thing is to allow the wood to absorb whatever it needs to be fully protected and then remove any extra oil that cannot be absorbed. About 30 minutes later go over one more time with a clean and dry cloth. Do not walk on the surface for about 2 hours after the original application.
Chimiver Lios Talita Plus | Oiled Floor Refresher | Recommendations
The most important thing is to make sure that you are refreshing an oiled surface. The second most important thing is to make sure that you are refreshing a clean and dry surface. Do not allow the refresher to puddle up or dry on the surface. All excess oil has to be removed on the spot. Do not mix up a number of refreshers and do not use it for outdoors projects. Store the product in a cool and dry place away from direct sunlight.
Chimiver Lios Talita Plus | Oiled Floor Refresher