Cleanfast Millster Sterilizing Fluid

PRODUCT INFORMATION:
Cleanfast Millster Sterilizing Fluid is a Sodium Hypochlorite based solution recommended for deodorizing & sterilizing work surfaces, sinks, walls, floors, toilets, drains, crockery, bottles & white fabrics etc. Proven to be effective against 99.9% of all known germs. Not suitable for metals, painted or varnished surfaces.

Cleanfast Millster Sterilizing Fluid
_________________________________________________________
ADVANTAGES:
POWERFUL DISINFECTION: Cleanfast Millster Sterilizing Fluid contains sodium hypochlorite, a proven and powerful disinfectant against a wide range of micro-organisms.
DEODORISES: Cleanfast Millster Sterilizing Fluid quickly destroys bacteria and germs, clearing offensive odours.
NON-FOAMING: This aspect of Cleanfast Millster Sterilizing Fluid makes it particularly suitable for cleaning in place applications.
EASILY RINSED LEAVING NO STREAKS OR SMEARS Cleanfast Millster Sterilizing Fluid rinses off to leave a clean residue free surface.
BIODEGRADABLE: Fully biodegradable.
SOLUBILITY: 100% soluble in water.

Cleanfast Millster Sterilizing Fluid
___________________________________________________________
DIRECTIONS FOR USE:
For de-staining crockery or work coats (whites) dilute Cleanfast Millster Sterilizing Fluid 1:50 with water and leave to soak for approximately 20 minutes. For the cleaning of work surfaces etc. dilute in the same proportions and wash down thoroughly. For the sterilization of bottles etc. add 5ml per 1lt of water. Always rinse well after use. Do not mix with other detergents, particularly acid based cleaners.

Cleanfast Millster Sterilizing Fluid
____________________________________________________________
HEALTH AND SAFETY: See Safety Data Sheet.

Cleanfast Millster Sterilizing Fluid
_____________________________________

_______________________
PACKAGING:
All our plastic drums are high molecular weight; high-density polyethylene designed to bring
the product to the customer in perfect conditions.
Size: 5 Lt. Drums,

Cleanfast Millster Sterilizing Fluid
___________________________________________________________
QUALITY ASSURANCE:
This product is manufactured in Ireland to ISO 9002 quality standards & conforms to R.E.A.C.H & CLP regulations. Shelf life: Not less than 3 years.
Safety Data Sheet
Corresponding to Regulation (EC) No 1272/2008 (CLP) Page 1 of 6
Date of issue: 01.01.17 Replaces version of: 01.01.13
PRODUCT NAME: CLEANFAST MILLSTER STERILIZING FLUID

SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE & OF THE COMPANY/UNDERTAKING – Cleanfast Millster Sterilizing Fluid
1.1. Product identifier
Product Name CLEANFAST MILLSTER STERILIZING FLUID
Product No.: KR 320
1.2. Relevant identified uses of the substance or mixture and uses advised against

Identified uses: STERILIZING LIQUID

SECTION 2: HAZARDS IDENTIFICATION – Cleanfast Millster Sterilizing Fluid
2.1. Classification of the substance or mixture
Classification: (Regulation (EC) No 1272/2008) H315 H319 EUH031
Human health: Causes skin irritation. Causes serious eye irritation.
Environment: The product contains a substance which is very toxic to aquatic organisms however the finished product is not expected to be hazardous to the environment.
2.2. Label elements
Detergent Labelling: <5% Chlorine-based bleaching agents
Labelling
WARNING
Hazard Phrases H315 Causes skin irritation
H319 Causes serious eye irritation
EUH031 Contact with acids liberates toxic gas
Precautionary
Statements P102 Keep out of the reach of children
P262 Do not get in eyes, on skin or on clothing
P264 Wash hands thoroughly after handling
P280 Wear protective gloves/protective clothing/eye protection/face protection
P302 IF ON SKIN: Remove contaminated clothing & rinse skin
thoroughly with soap & water. Obtain medical attention if irritation persists
P305 IF IN EYES: Flush eyes with water, remove contact lenses if
present & continue rinsing. Obtain medical attention if irritation persists.
2.3. Other hazards: N/A
Safety Data Sheet
Corresponding to Regulation (EC) No 1272/2008 (CLP) Page 2 of 6
Date of issue: 01.01.17 Replaces version of: 01.01.13

SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS – Cleanfast Millster Sterilizing Fluid
3.2. Mixtures SODIUM HYPOCHLORITE SOLUTION. % Cl ACTIVE <0.5% CAS-No.: 7681-52-9 Classification (EC 1272/2008) EUH031 Skin Corr. 1B – H314 Aquatic Acute 1 – H400
A Full Text for all Hazard Statements are Displayed in Section 16

SECTION 4: FIRST AID MEASURES – Cleanfast Millster Sterilizing Fluid
4.1. Description of first aid measures
Inhalation: Remove immediately from source to fresh air. Obtain medical attention if any discomfort continues.
Skin Contact: Remove contaminated clothing & rinse skin thoroughly with soap & water. Obtain medical attention if irritation persists.
Eye Contact: Flush eyes with water immediately. Obtain medical attention if irritation persists.
Ingestion: Rinse out mouth immediately with water. DO NOT INDUCE VOMITING! Drink a few glasses of water or milk. Get medical attention.
Protection of
first aider: Avoid contact with skin and eyes (see Section 8.)
4.2. Most important symptoms and effects, both acute and delayed
Inhalation: Irritation of nose, throat and airway
Ingestion: May cause discomfort if swallowed. May cause pain or vomiting
Skin contact: Contact may cause redness & skin irritation.
Eye contact: Causes irritation to eyes. Contact may cause redness and/or tearing.
4.3. Indication of any immediate medical attention and special treatment needed
The severity of the symptoms described will vary dependant of the concentration and the length of exposure.

SECTION 5: FIRE FIGHTING MEASURES – Cleanfast Millster Sterilizing Fluid
5.1 Suitable Extinguishing Media: The product is non-combustible. Use fire- extinguishing media appropriate for surrounding materials.
5.2 Unsuitable: N/A
5.3 Specific Hazards: During fire, toxic gases (CO, CO2) are formed. Chlorine gas.
5.4 Special Equipment for
the protection of Fire Fighters: Avoid fumes. Self-contained breathing apparatus and full protective clothing must be worn in case of fire.

SECTION 6: ACCIDENTAL RELEASE MEASURES – Cleanfast Millster Sterilizing Fluid
6.1 Personal Precautions: Wear protective clothing as described in Section 8 of this safety data sheet
6.2 Environmental Precautions: Avoid discharge to the aquatic environment.
6.3 Methods for Cleaning up: Small Spills – Flush with water.
Large Spills – Contain and collect spillage and absorb on to sand.
Safety Data Sheet
Corresponding to Regulation (EC) No 1272/2008 (CLP) Page 3 of 6
Date of issue: 01.01.17 Replaces version of: 01.01.13

SECTION 7: HANDLING AND STORAGE – Cleanfast Millster Sterilizing Fluid
7.1 Handling
Technical Measures: No special measures required.
Safe Handling Advice: Avoid contact with skin & eyes. Comply with instructions for use.
7.2 Storage
Technical Measures: No special measures required.
Storage Conditions: Store in a cool dry place.
Incompatible Products: Acids, Strong Oxidizing Agents.
Packaging: Plastic Drums.
Packaging Materials: Recommended: Plastic Materials, Polyethylene, Polypropylene

SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION – Cleanfast Millster Sterilizing Fluid
8.1 Engineering Measures: No special measures required.
8.2 Personal Protection Equipment:
Respiratory Protection: Provide adequate ventilation in areas of confined space.
Hand Protection: Use Chemical Resistant Gloves to EN Standard 374
Eye Protection: Use Chemical Goggles or Face Shield to EN Standard 166 Level 3 or higher
Skin Protection: Wear Plastic Apron EN Standard 13034 Type PB[6] & Face Shield EN Standard 166 Level 3 or higher
8.3 Hygiene Measures: Handle in accordance with good industrial hygiene and safety practices.
8.4 Occupational Exposure Limits: N/A

SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES – Cleanfast Millster Sterilizing Fluid
9.1. Information on basic physical and chemical properties
a) Appearance: Yellow/green liquid.
b) Odour: Chlorine
c) Odour threshold: N/A
d) pH: 13+/-0.5 (undiluted)
e) Melting point / freezing point: No data available
f) Initial boiling point & boiling range: No data available
g) Flash point: No data available
h) Evaporation rate: No data available
i) Flammability solid, gas): No data available
j) Upper/lower flammability or explosive limits: No data available
k) Vapour pressure: No data available
l) Vapour density: No data available
m) Relative density: 1.08kg/dm3
n) Solubility(ies): Soluble in Water
o) Partition coefficient: n-octanol/water: No data available
p) Auto-ignition temperature: No data available
q) Decomposition temperature: No data available
r) Viscosity: No data available
s) Explosive properties: No data available
t) Oxidising properties: No data available
Safety Data Sheet
Corresponding to Regulation (EC) No 1272/2008 (CLP) Page 4 of 6
Date of issue: 01.01.17 Replaces version of: 01.01.13

SECTION 10: STABILITY AND REACTIVITY – Cleanfast Millster Sterilizing Fluid
10.1. Reactivity: There are no known reactivity hazards associated with this product.
10.2. Chemical stability: Stable under normal temperature conditions and recommended use.
10.3. Possibility of hazardous reactions: Hazardous Polymerisation
10.4. Conditions to avoid: Avoid Extreme Temperatures. Avoid contact with acids &/or oxidising agents.
10.5. Incompatible materials: Acids &/or oxidizing agents
10.6. Hazardous decomposition products: None under normal conditions.

SECTION 10: TOXICOLOGICAL INFORMATION – Cleanfast Millster Sterilizing Fluid
11.1. Information on toxicological effects:
Inhalation: Irritation of nose, throat and airway
Ingestion: May cause discomfort if swallowed. May cause pain or vomiting
Skin contact: Contact may cause redness & skin irritation.
Eye contact: Causes irritation to eyes. Contact may cause redness and/or tearing.
Toxicological information on ingredients.
SODIUM HYPOCHLORITE SOLUTION. % Cl ACTIVE (CAS: 7681-52-9)
Acute toxicity:
Acute Toxicity (Oral LD50)
1100 mg/kg Rat
Acute Toxicity (Dermal LD50)
> 20000 mg/kg Rabbit
Acute Toxicity (Inhalation LC50)
> 10.5 mg/l (vapours) Rat 1 hour
REACH dossier information

SECTION 12: ECOLOGICAL INFORMATION – Cleanfast Millster Sterilizing Fluid
Eco-toxicity
This product is Readily Biodegradable and not expected to be hazardous to the environment.
12.1. Toxicity
Ecological information on ingredients:
SODIUM HYPOCHLORITE SOLUTION. % Cl ACTIVE (CAS: 7681-52-9)
Acute Toxicity – Fish
LC50 96 hours > .023 mg/l Pink salmon
Acute Toxicity – Aquatic Invertebrates
EC50 48 hours 35 μg/L Ceriodaphnia dubia
NOEC 48 hours 25 μg/L Ceriodaphnia dubia
Acute Toxicity – Aquatic Plants
EC50 96 hours ~ 0.01 mg/l Myriophyllum spicatum
NOEC 96 hours 0.02 mg/l Myriophyllum spicatum
REACH dossier information
12.2. Persistence and degradability
Degradability: The substances contained in this preparation comply with the biodegradability criteria as laid down in Regulation (EC) No.648/2004 on detergents. Data to support this assertion are held at the disposal of the competent authorities of the Member States and will be made available to them, at their direct request or at the request of a detergent manufacturer.
Safety Data Sheet
Corresponding to Regulation (EC) No 1272/2008 (CLP) Page 5 of 6
Date of issue: 01.01.17 Replaces version of: 01.01.13
12.3. Bioaccumulative potential
No data available on bioaccumulation.
12.4. Mobility in soil
Mobility: The product is soluble in water.
12.5. Results of PBT and vPvB assessment
Not determined.
12.6. Other adverse effects
Not determined.

SECTION 13: DISPOSAL CONSIDERATIONS – Cleanfast Millster Sterilizing Fluid
General information: Disposal to licensed waste disposal site in accordance with local Waste Disposal Authority
13.1. Waste treatment methods
Dispose of waste in accordance with local regulations. Recover, reclaim or recycle, where possible.

SECTION 14: TRANSPORT INFORMATION – Cleanfast Millster Sterilizing Fluid
The product is not covered by international regulation on the transport of dangerous goods:
REGULATIONS CLASS
RID/ADR: Not Classified
ICAO/IATA-DGR: Not Classified
GGVSee/IMDG-Code: Not Classified
14.1. UN number: N/A
14.2. UN proper shipping name: N/A
14.3. Transport hazard class(es): N/A
14.4. Packing Group: N/A
14.5. Environmental Hazards: Environmentally Hazardous Substance/
Marine Pollutant: N/A
14.6. Special precautions for user: NA
14.7. Transport in bulk according to
Annex II of MARPOL73/78 and the
IBC Code: N/A

SECTION 15: REGULATORY INFORMATION – Cleanfast Millster Sterilizing Fluid
15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture
Statutory Instruments
Corresponding to Preparations Regulations S.I. No. 62 of 2004
Approved Code Of Practice
Classification and Labelling of Substances and Preparations Dangerous for Supply.
6 / 7
Guidance Notes
Workplace Exposure Limits EH40.
Safety Data Sheet
Corresponding to Regulation (EC) No 1272/2008 (CLP) Page 6 of 6
Date of issue: 01.01.17 Replaces version of: 01.01.13
EU Legislation
Regulation (EC) No 1272/2008 of the European Parliament and of the Council of 16 December 2008 on classification, labelling and packaging of substances and mixtures, amending and repealing Directives 67/548/EEC and 1999/45/EC, and amending Regulation (EC) No 1907/2006 with amendments.
15.2. Chemical Safety Assessment
No chemical safety assessment has been carried out.

SECTION 16: OTHER INFORMATION – Cleanfast Millster Sterilizing Fluid
Revision Comments
Re-issued according to Regulation (EU) No 453/2010.
Revision Date: 01.01.17
Revision No: 3
Replaces version of: 01.01.13
Hazard Statements In Full
H315 Causes skin irritation
H319 Causes serious eye irritation
EUH031 Contact with acids liberates toxic gas
__________________________________________________________________________
The information contained herein is based on the present state of our knowledge and is intended to describe our products from the point of view of safety requirements. It should therefore not be construed as guaranteeing specific properties.

https://cleanfast.ie/cleanfast-millster-sterilizing-fluid-html?search=cleanfast%20millster

Cleanfast Millster Sterilizing Fluid